8 discussions on Cabling-Design.com Forums about the Cisco 2948G-L3: what owners asked, what went wrong, and what fixed it.
Hi,We have a Linksys managed 16 port switch with VLAN capability. There are unmanaged switches connected to each port of this Linksys switch. The domain controller (DHCP+DNS) is connected to port 16.A separate internet feed (on the same...
We use a Cisco 2948G-L3 as our backbone. I purchased another one as aspare. I wanted to try loading the configuration file via tftp serveron the spare. The configuration file loaded just fine but I foundthat non of the 48 10/100 ports...
I have a Cisco 2948G-L3 Switch. It has to two GBIC slots. I put aWS-G5483, Catalyst 1000BASE-TX GBIC Module in each GBIC slot.I want to uplink it to a new Cisco 2960G-24T. It has four dual purposeports that allow either a copper or a...
I have a Cisco 2950G-L3 switch. It is configured for IntegratedRouting and Bridging. I have it configured with several Bridge Groups(BVIs.) Each BVI has several FastEthernet Ports assigned to it. EachBVI has an ip address assigned to...
Hy Leute,Ich hab ein Problem und zwar hab ich einen Cisco 2948G-L3 Switch ohneimage file im Bootflash, aber leider gibts das file nicht mehr auf derCisco Seite zum Downloaden!Hat vielleicht wer so einen switch oder kann mir wer das...
I have a Cisco 2948G-L3 switch that has four BVIs on it. Each BVI hasseveral ports axxigned to it and each BVI has an ip address, one foreach subnet on my network. I have IRB configured. The access switchesconnect to ports on whatever...