9 discussions on Cabling-Design.com Forums about the Ademco Z1100: what owners asked, what went wrong, and what fixed it.
Building new house and interested in recommendations on the best alarmsystem to install. I will most likely be doing the work myself. I haveinstalled three full systems (2 DSC and 1 Moose) thus far and havenever had a problem with them. ...
Periodically I buy up old panels in bulk from a lot of the localinstallers who work for a variety of large companies here in town. Whenthey are doing takeovers, the old panels are thrown out, and I buy themfor pennies on the dollar, and put...
Hi,This isn't that important, I'm just curious. the oblong knockout inthe middle of the Ademco can lids, what's that for? I know the one bythe edge is for the key lock but the one in the middle stumps me.Thanks,Too curious for my own...
Would anyone have any idea of the makes and models of the ADT systemsinstalled in homes?
Hi all:We have a Moose Z1100 (Series I) that we hope to have monitored. Itwas monitored until a while ago when our alarm company went out ofbusiness. The alarm system seems to work fine except that when weplug the panel into the phone...
Today for a time I was feeling like I was Mr. Trunk Slammer. I am standing by to do a download of a DSC 1864 for a takeover of a Moose Z1100. I am happy that at least the Z1100 is going. So a tech says can you download the panel via an...