Does any know of a quick guide to setting up VPN access? We've already got this setup (pre-dating my start here) and I need to allow access to a second private network that's attached to this firewall.
At present the original still works but my copied config for the second network doesn't: there's no evidence of any rejected/accepted traffic to any machines on the other network despite continued attempts...
If you have the first set of VPN up, the second one should be easier. Just make sure that you have used the same VPN policy.
If the second set does not work, check the log to make sure which phase it fails on. Then you can work around it depending on the situation.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.