Help setting up a Zyxel SSL 10 in "full VPN" access


I'm having a problem setting up a Zyxel SSL10 appliance for "full" VPN access.

The SSL10 lives on the DMZ of a Zywall 5. I can sussesfully connect to from the WAN side using the HTTPS login page and the JAVA SSL/VPN application seems to run fine on my client PC. If I type an Ipconfig on my client I do see a PPP ZyWALL-SSLVPN entry with a proper IP address assigned (i.e an address in my target subnet). However I can't PING or otherwise access anything in my target subnet.

I have noticed that the submask for the PPP ZyWALL-SSLVPN net is set to where I would have expected a class C subnet, but that might be irrelevant.

Anyway what can be wrong ? Do I have to do some further adjustment on the Firewall itself ? I have looked at the logs (buth SSL10 and Zywall

5) and there is nothing obvious as far as I can tell.

Any help most welcome

Best regards


Reply to
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.