Ethernet LAN

  1. Home
  2. Ethernet LAN
1381 Threads Posts
to

Collision Detection and Jam Signal on the LAN

I want to get the collisions on the LAN. I know that in half-duplex network there is jam signal to demonstrate the coll...
1 comments posted 21yrs
posted by xydarcher
1 comments posted 21yrs posted by xydarcher

Max number of switches connected (cascading) ?

Hi! I wonder, what is the maximum number of ethernet 100Mpbs switches, that can be connected together to form a larger...
2 comments posted 21yrs
posted by david.balazic
2 comments posted 21yrs posted by david.balazic

Managed Gigabit Switch with MAC address filtering

Hi all, I need a 24 port managed Gigabit switch that can let people connect to the network based on their network card'...
1 comments posted 21yrs
posted by niteriderxp
1 comments posted 21yrs posted by niteriderxp

3Com switches and 1000Base SX problem

I have a strange problem. Our customer has multimode fiber installed between wiring closets. They have 3Com 3300 series...
2 comments posted 21yrs
posted by flamingjay
2 comments posted 21yrs posted by flamingjay

Password for ancient ATI FX612TX hub

I am starting to do some traffic analysis on our network and needed to find an true ethernet 100B-TX hub. Fortunately,...
3 comments posted 21yrs
posted by stutzman
3 comments posted 21yrs posted by stutzman

Question about old Decision Data products....

Hi, I stumbled across some quite old Decision Data products. I tried searching the web for information, but I didn't fi...
0 comments posted 21yrs
posted by peter.z.lindblom
0 comments posted 21yrs posted by peter.z.lindblom

SmartBits 2000 Documentation

Hi All, My engineering team recently inherited from another group a Spirent SmartBits2000 chasis with both ML-5710A and...
1 comments posted 21yrs
posted by stocksb
1 comments posted 21yrs posted by stocksb

How to make a shielded cat6 patch cable

Hello, I need to know how to make a cat6 shielded patch cable (sstp/fftp). All sites I have found explain how to build...
16 comments posted 21yrs
posted by nospam_garnier.l
16 comments posted 21yrs posted by nospam_garnier.l

avaya cajun p334t and smartbits

Good morning to All and to All Good morning!, I was assigned to develop a test where I can test the 334t using smart bi...
2 comments posted 21yrs
posted by jabriolusenet
2 comments posted 21yrs posted by jabriolusenet

Strange switch behaviour in VLAN network

Hi all, I'm experiencing some weird problems in our switched network and am really stuck there. Our configuration is th...
2 comments posted 21yrs
posted by thepoet_nospam
2 comments posted 21yrs posted by thepoet_nospam

Built-In Bit Error Test?

Does ethernet have any built-in error tests that measure either bit or frame errors? Or are there readily-available too...
1 comments posted 21yrs
posted by dm161mychain616
1 comments posted 21yrs posted by dm161mychain616

Foundry vs HP Procurve

We are going to be upgrading our network and I'mm looking for feedback on the Foundry and HP Procurve lines, specifical...
4 comments posted 21yrs
posted by tbates
4 comments posted 21yrs posted by tbates

Power over Ethernet Environmental Requirements

Hi all, Voice over IP (VoIP) is a technology being considered where I work (a University). We have a very large network...
4 comments posted 21yrs
posted by amahmood5
4 comments posted 21yrs posted by amahmood5

question about 100mbits/sec

Hi, Assume that several packets with a total amount of 100 mbits (not in bytes to simplify) are send together . Assume...
3 comments posted 21yrs
posted by sdqfsd
3 comments posted 21yrs posted by sdqfsd