1. Home
  2. Cisco Systems
  3. vpn client problems

vpn client problems

Hi gents, again , I've cleaned my pix config but I have a problem , vpn tunnels work perfect pix to pix, but the pix to vpn connects but doesn't achieve to get to inside hosts. I can see that it seems as it's still negotiating . It gets te ip address, but no ping, no www no shh.

The only response I get in the log is :

6 12:50:51.032 02/14/06 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to X.175.207.82

97 12:50:51.298 02/14/06 Sev=Info/4 IKE/0x63000014 RECEIVING > ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to X.175.207.82

99 12:51:01.861 02/14/06 Sev=Info/4 IKE/0x63000014 RECEIVING
Reply to
Sako
Loading thread data ...

have you tried adding : isakmp nat-t have you tried a 3DES crypto map and ISAKMP policy for VPN clients ?

Reply to
Martin Bilgrav

I'll try nat-t I have 3des not available at the moment .

Reply to
Sako

I've tried nat-t , nat-traversal 100 , yesterday it seems that I achieved to have in stadistics Secured Routes , the right route, but now is again 0.0.0.0

Reply to
Sako

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.