VPN 3030 and OSPF configuration

Apr 08, 2005 2 Replies

Current Configuration:



-----------------------



VPN_Concentrator_3030_Public_Interface -----> 6509 (vlan int 999) VPN_Concentrator_3030_Private_Interface ------> 6509 (vlan int 888)



We are not following Cisco's symantic of public, private and external interfaces suggested in documentation.



Private interface is only used for Managemnt.


5 groups are configured on Concentrator. Aggregate block is
172.31.0.0/24

Static route is installed on 6509. # ip route 172.31.0.0 255.255.255.0 PUBLIC_INTERFACE_OF_CONCENTRATOR



Everything works.



Desired Configuration:



----------------------- We would like to have OSPF between 6509 and Concentrator, instead of using static routes. Enabled OSPF on PUBLIC_INTERFACE_OF_CONCENTRATOR. Reverse Route Ijection: is setup properly and have



172.31.0.0/255.255.255.0 in hold down routes.

Problem:



-------- OSPF is up between 6509 and PUBLIC_INTERFACE_OF_CONCENTRATOR. Concentrator gets all the Routes from 6509. But, Concentrator is NOT feeding 172.31.0.0/24 routes in OSPF. Thus



6509 is NOT seeing 172.31.0.0/24 routes from Concentrator.

Any pointers would be appreciated.



Thanks.



Configuration | System | IP Routing | OSPF Configuration | System | IP Routing | OSPF Areas Configuration | Interfaces | Ethernet 2 -> OSPF Tab

formatting link

I do have all params. configured. 'sh ip ospf nei' on 6509 give me Concentrator as ospf neighbour. Also VPN_Concentrator gets all the routes from 6509.

But, Concentrator is NOT able to feed ip block (used by groups defined on concentrator) into OSPF area.

Thanks.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required