SCP output from CiscoWorks

Getting the following output from CW config archive job:

CM0151 PRIMARY STARTUP Config fetch failed for DUCE-gw Cause: Failed to fetch config using SCP.Privilege denied. Verify SCP is enabled or not. Could not detect protocols running on the device PRIMARY-STARTUP config Fetch Operation failed for TFTP. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.CM0151 PRIMARY RUNNING Config fetch failed for DUCE-gw Cause: Failed to fetch config using SCP.Privilege denied. Verify SCP is enabled or not. Could not detect protocols running on the device PRIMARY-RUNNING config Fetch Operation failed for TFTP. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.

The error is that "privilege is denied", yet I have given all users level 15 privilege. SCP is enabled. Any ideas?

Reply to
philbo30
Loading thread data ...

This turned out to be an AAA issue; the command:

aaa authorization exec default group tacacs+ local

is required for scp to operate properly in an AAA environment.

Reply to
philbo30

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.