Routing Individual addresses

I have two separate individual IP's routed down to us from our ISP and I have a Class C /29 subnet giving me 6 usable Public IP's.

I would like to use the two separate individual IP's for my Cisco 827 router & my firewalls ext interface. Also I would like to route the /29 subnet to a DMZ segment connected to the firewall.

One problem, ISP requires a single address assigned to the Dialer interface from the /29 subnet. Its negotiated upon connection.

Currently I have my public servers protected by ACL's on the 827. Then have firewall to protect LAN. Is there any advantage of moving my DMZ to a third NIC behind my firewall?

What would be the best approach? Not sure if I could have a /29 address on my router and individually route the rest of the subnet one by one to DMZ behind firewall.

Reply to
moomooo
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.