PIX and VPN Client

Quick question - is any opportunity to add only few individual routes to VPN-client routing table instead of default-route. VPN Clients will use PIX (PixOS 6.x or 7.x) as VPN Server.

I know that I can do this in IOS, using:

crypto isakmp client configuration group FOOBAR acl 100 ! access-list 100 permit ip any

but what about PixOS ? (above will add only 10/8 to routing table).

Best regards, Robert

Reply to
Robert Hass
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.