Is it true that I can not do port forwarding in this early version of the PIX? I know that I can map a public IP to a private IP, but how can I map a public IP/ports to different internal IP addresses?
- posted
17 years ago
Is it true that I can not do port forwarding in this early version of the PIX? I know that I can map a public IP to a private IP, but how can I map a public IP/ports to different internal IP addresses?
You need 6.0 or later for port forwarding.
Your Subject header indicates PIX 501 and version 5.2. The PIX 501 was not introduced until PIX 6.1(1). If you really have a PIX 501 then you already have a software version that does what you need.
If what you have is a PIX 510 instead of 501 then you might well have 5.2. I can't think of any way to do what you want in any version earlier than 6.0 .
If you do have 6.0 or later,
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.