NAT THROUGH VPN

Hi, i'm Paolo and i'm new....

In my situation i have a PIX (515) whit public ip address on the outside interface. I have my lan with ip private address. (172.16.4.0 / 24 ) I have set up a VPN IPSEC to my branch remote office (172.16.16.0 /

24). PIX ---> Router Cisco (Router cisco also have IP public address on the external interface). This work very well. Now I have a company (not our branch office) that need to access on a specific server(172.16.16.28) on a specific service in the Branch Office.

Now my question is: Is it possible to do a NAT on the PIX so the remote company (not branch office) could access through NAT on the PIX to the 172.16.16.28, or i have to do a NAT on the CISCO ROUTER?

I hope to some answer.... Thanks

Paolo Zen

Reply to
Paolo
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.