I have a main office with PIX 515 and remote office. We want to be able a couple Cisco VPN clients to be able to connect in the same time from the remote office but we have one real static address. How can we resolve this?
I alse tried one of the clients to use the default UDP port. But when configure the other client to use TCP, it's not able to connect the the main office PIX. What I need to change in the PIX configuration? Thanks for the help.
What VPN Protocol are you using?
The PIX needs to be set up for 'nat traversal' (isakmp nat-traversal 20 )
What hardware are you using at the other end? When we used LinkSys Routers we had to enable PPTP/IPSec Passthrough as well.
ScottI have a main office with PIX 515 and remote office. We want to be
The problem was isakmp nat-traversal 20 Thanks!
Have something to add? Share your thoughts — no account required.
Ask the community — no account required