ISG: volume based quota

Hi all.

I'm trying to specifiy a volume based quota on ISG IOS for PPTP user. Volume and time quotas are defined in RADIUS profile. I see its applied to the session. But it seems quota does not work. No events or radius packets are generated when any quota is over. Can anyone help me to understand what I do wrong?

ISG is Cisco IOS Software, 7301 Software (C7301-JS-M), Version 12.2(28)SB, RELEASE SOFTWARE (fc2)

Here is config excerption and RADIUS profile

subscriber feature prepaid prepaid-conf threshold time 5 seconds threshold volume 15000 bytes interim-interval 1 minutes method-list author PPTP_AAA method-list accounting PPTP_AAA password cisco ! vpdn-group PPTP_G1 ! Default PPTP VPDN group accept-dialin protocol pptp virtual-template 1 local name N41-BRAS0 ! interface Virtual-Template1 ip unnumbered Loopback0 ip verify unicast source reachable-via rx no ip unreachables no peer default ip address ppp max-bad-auth 3 ppp mtu adaptive ppp authentication chap pap PPTP_AAA ppp authorization PPTP_AAA ppp accounting PPTP_AAA

RADIUS: pppuser Password = "cisco" Service-Type = Framed-User, Framed-Protocol = PPP, Cisco-Avpair = "ip:addr-pool=Client", Account-Info = "Aprepaid", Service-Info = "QD;256000;48000;96000;U;256000;48000;96000", Idle-Timeout = 300 prepaid Password = "cisco", Service-Type = Outbound-User Cisco-Avpair = "ip:traffic-class=in access-group 100", Cisco-Avpair = "ip:traffic-class=out access-group 100", Cisco-Avpair = "prepaid-config=prepaid-conf", Control-Info = "QT60", Control-Info = "QV1024000"

Thanx in advance. Pavel.

Reply to
Pavel Crasotin2147483647
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.