IGRP to a Pix 506

Hi !

Im trying to get some routing to work on my home lab. All routers running igrp. I have a 3620 Router on 172.17.1.2/30 >>> 2511 Router on

172.17.1.1/30 Serial then on ether 0 on the 2511 Router 192.168.1.111/24 >>>>> Pix (inside) 192.168.1.3/24 gateway to the internet.

The 3620 can ping the ethernet port on the 2511 (192.168.1.111) but not the pix (192.168.1.3).

The 2511 can ping the pix no probs. I have a default route one the

3620 of :-

Gateway of last resort is 172.17.1.1 to network 0.0.0.0

And on the 2511:-

Gateway of last resort is 192.168.1.3 to network 0.0.0.0

My computer's gateway is the 2511's 192.168.1.111 ether port and I access the web no probs.

Is this an IGRP problem with the pix or an ACL problem with the pix ?

Cheers

Reply to
boxers999
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.