EAP-TLS question

Sorry for the newb question, but I can't find a definitive answer elsewhere.

We are testing EAP-TLS for our wireless, using MS Enterprise 2003 for PKI and IAS. Our AP's are all Cisco 1200's.

The question is: is it possible to use an 1100 AP as a workgroup bridge authenticating via EAP-TLS (the bridge, not machines connected to the bridge). I guess the follow-up question is: how the heck do you get a certificate onto an 1100?

Thanks in advance...

Reply to
runbuh
Loading thread data ...

You may wish to investigate the Cisco Aironet Hardware Association Matrix:

formatting link
Sincerely,

Brad Reese BradReese.Com Cisco Resource Center Toll Free: 877-549-2680 International: 828-277-7272 Website:

formatting link

Reply to
BradReeseCom

runbuh schrieb:

Nope. You'll need LEAP IAS 2k3 doesn't understand LEAP. You can use LEAP against the embedded IOS RADIUS server.

In WGB mode some restrictions (VLAN useage) apply.

Reply to
Uli Link

Reply to
runbuh

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.