1. Home
  2. Cisco Systems
  3. DNSSERVER Error.

DNSSERVER Error.

I have CISCO 2800 router and I am using this router to send internet to about 200 peoples With DHCP. It was fine in some days. But last few days Router gives these errors and Stopped to send internet. Errors are :

Error 1: %TCP-2-INVALIDTCB: Invalid TCB pointer: 0x46958718 -Process= "DNS Server Input", ipl= 0, pid= 221 -Traceback= 0x41259724 0x41A50418 0x41A540FC

0x41A281D4 0x41A2 D560 0x41416AEC 0x423CD6E4 0x423CD6C8

Error 2: *Dec 14 03:20:02.507: %DNSSERVER-3-UDPDNSOVERLOAD: Low available memory: droppin g from .

I googled them and CISCO says My Router Memory is low. In my opinion

2800's Memory is enough for 200 people. I think there have another error. Please help me how can i fix it. And how can i see my router's available memory. THX
Reply to
Ts8060
Loading thread data ...

show memory summary - look at the free and largest columns. If either is really, really small you may have a problem.

show process memory - may give some clue about where your memory is going.

Reload your router - if available memory is big and the problem goes away for for a while, then maybe you do have memory issue.

Reply to
Martin Gallagher

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.