1. Home
  2. Cisco Systems
  3. Connected to DSL PPPOE, Cant Ping from Outside Interface, Inside OK

Connected to DSL PPPOE, Cant Ping from Outside Interface, Inside OK

I have a 1721 router with a WIC-1ENET card that I have connected to a DSL Modem. The WIC-1ENET port is configured with a Dialer to do the PPPoE. The Built in is hard coded IP.

I then have a VPN connection back to HQ PIX.

If I ping and source the port to the Built in I can ping just fine. If i ping without specifying a port it does not ping.

This is a problem as I'm trying to save the Config to a TFTP Server on the other side of the VPN. I cant seem to source the TFTP Copy from the Internal port.

Any Suggestions?

Thanks, Scott

Reply to
Scott Townsend
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.