Cisco ONS 15454- SONET ring management

Hi,

I have 4 Cisco ONSs in a SONET ring. The management port on one of the ONSs, say ONS-1, is connected physically to my management subnet through a Cisco 3750 switch. The management ports on other ONSs are not connected to the switch.

Can someone explain how do the other ONSs know to direct their management information to ONS-1? I know they communicate over SDCC ( SONET Data Communications Channel) which has OSPF built into it but any more insight into this will be greatly appreciated!!

Thank you very much!!

-WP

Reply to
W_P
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.