Cisco 3640 with NM-4T1-IMA

- J
- joshobrien77
  
  Contact options for registered users
posted
17 years ago

Tue, Oct 10, 2006 2:44 AM

I am configuring a lab. I have 3 L3 Devices. One of which is a 3640 with a NM-4T1-IMA that I am trying to connect to a 1760 with a WIC 1DSU T1. First of all is this even possilbe? Second where would I start. I have experiance with T1's and I have the 1760 configured with: ! interface Serial0/0 ip address 10.5.100.65 255.255.255.192 encapsulation ppp fair-queue service-module t1 timeslots 1-24

I would like the 3640 configured as the DCE side of the link. Overall I just need basic T1 connectivity for test prep and labing out routing ideas.

My issue so far is that the NM-4T1-IMA does not appear to be designed to function as a single T1 card. I cant access controller or service module commands to try to force it to do what I want. Any ideas?

thanks

Loading thread data ...

- D
- Doug McIntyre
  
  Contact options for registered users
Vote on answer
posted
17 years ago

Tue, Oct 10, 2006 3:49 AM

No, the IMA card is an ATM card used to bind 1-4 T1s together into an ATM IMA bundle. The WIC-1DSU card doesn't do ATM. You won't be able to use them to talk to one another.

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.