Have adsl customers going through an ATM/ima link to ATT/SBC. Customers claim they aren't getting guaranteed bw of 3Mbps downstream.
Would like any comments on the ATM/ima config on ourinterface. This is from a 7206 running c7200-ik9s-mz.122-26.bin
ATM1/0 description no ip address load-interval 30 ima-group 0 ! interface ATM1/ima0 no ip address load-interval 30 ima differential-delay-maximum 50 no atm ilmi-keepalive ! .....
interface ATM1/1 description no ip address load-interval 30 ima-group 0 ! interface ATM1/2 description no ip address load-interval 30 ima-group 0 ! interface ATM1/3 description no ip address load-interval 30 ima-group 0 ! interface ATM1/4 description no ip address load-interval 30 ima-group 0 ! interface ATM1/5 description no ip address load-interval 30 ima-group 0 ! interface ATM1/6 description no ip address load-interval 30 ima-group 0
sample customer interface 3Mbps only getting 1.5.
interface ATM1/ima0.79 point-to-point description client: ip address x no ip redirects no ip unreachables atm route-bridged ip pvc 9/52 ! end