1. Home
  2. Cisco Systems
  3. 2621 Router Network on a stick config

2621 Router Network on a stick config

I have set up a trunk link comprised of native vlan (ip address

192.168.30.15 255.255.255.0) and vlan 500 ( ip address 192.168.25.15 255.255.255.0). Both are sub-ifs of eth0/0. From the router, I am able to ping address 192.168.25.77. From the workstation, I am able to ping 192.168.30.15 and 192.168.25.15 but not 192.168.25.77.

Would anyone know why I am not able to ping 192.168.25.77?

Thanks in advance

Reply to
RG
Loading thread data ...
  • RG hackte in den Rechenknecht:

Wrong/no default gateway on 192.168.25.77?

luke

Reply to
Lukas Schratz

Is default gateway on 192.168.25.77 pc the right one?

Reply to
Igor Mamuzić a

Yes, you are absolutely right. There was no reverse route setup on the remote machine.

Sorry, for the bother.

Reply to
RG

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.