LAN and Telecom Cabling

Wifi access point/router for business

Hello. At work we have alot of consumer wifi AP and routers (acting as AP's) and they work rather poor. I have finally...

2 comments posted 17yrs

posted by "simen at mac dot com"

2 comments posted 17yrs posted by "simen at mac dot com"

iperf question

If I do a simple iperf test such as this: iperf -s on machine with IP 10.1.1.2 then iperf -c 10.1.1.2 What speed is it...

5 comments posted 17yrs

posted by george

5 comments posted 17yrs posted by george

ethernet and AC in conduit

I know it's not recommended or allowed by the NEC , but I'm wondering if anybody knows how likely I am to have problems...

19 comments posted 17yrs

posted by seaweedsteve

19 comments posted 17yrs posted by seaweedsteve

How to keep cat5e cables from picking up RFI?

Last winter I did some in-wall cat5e wiring from my router to my computer. It's probably about a 50' run, maybe a bit m...

2 comments posted 17yrs

posted by benjunk

2 comments posted 17yrs posted by benjunk

star coax network with rj adapters ?

Hello, Two years ago, I bought a house that already had coaxial plates installed on almost each rooms. Each plate uses...

9 comments posted 17yrs

posted by eric.bouchardlefebvre

9 comments posted 17yrs posted by eric.bouchardlefebvre

Fiber ELECTRONICS cleaning

Has anyone come across a cleaing tool for the optics in a driver/receiver. We're finding that 10gig optics are a lot mo...

0 comments posted 17yrs

posted by qernqrq

0 comments posted 17yrs posted by qernqrq

E1and RJ48(C|X) cabling

Hello, I'm currently using RJ48C cables to connect an aculab card (Prosody PCI) to a PBX to make calls, etc. via this....

5 comments posted 17yrs

posted by en.ravn

5 comments posted 17yrs posted by en.ravn

10BaseT over RG6 Coax

I've switched my Internet service from Cox Cable to AT&T DSL and now want to extend my local ethernet from my upstairs...

2 comments posted 17yrs

posted by nobody

2 comments posted 17yrs posted by nobody

How to get Internet over Powerline to work?

Hello Setup ======= I have deal with my ISP where they supply both internet and television over ADSL. They have supplie...

0 comments posted 18yrs

posted by zach.bastick

0 comments posted 18yrs posted by zach.bastick

Cat 5 Install Pricing

Hi Everyone, I've done PC repair work as a side business on the weekends for years now and recently I have a customer t...

3 comments posted 18yrs

posted by Mikek400

3 comments posted 18yrs posted by Mikek400

Does patch-panels affect network speed?

Hello, I am in the process of designing a mid-size network (~300 connections) and I play with the idea of having 2 leve...

27 comments posted 18yrs

posted by brunogirard1970

27 comments posted 18yrs posted by brunogirard1970

Wireless Vs Eternet Extenders

Wondered if anyone can advise on the use of ethernet extenders. We have a problem in connecting a remote building about...

2 comments posted 18yrs

posted by tombaily3

2 comments posted 18yrs posted by tombaily3

Cable management products.

This setup wasn't my idea, just working with what i walked into. 2 --- 2 poll Racks. Side by Side with about 1 foot of...

1 comments posted 18yrs

posted by plops_dad

1 comments posted 18yrs posted by plops_dad

newbie cat 5 question!

Hi there - Please can you help! I need to know if you can extend CAT5 cables with CAT5e cables in theory, and vice versa...

1 comments posted 18yrs

posted by turnerpaul

1 comments posted 18yrs posted by turnerpaul

Standard for Proximity to Power

Hello, all; Where in the Standards is the minimum distance from power given. Twelve inches, yes, but where precisely doe...

0 comments posted 18yrs

posted by egnlsn

0 comments posted 18yrs posted by egnlsn