Latest threads in Cisco Systemsshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Question on QoS on a 6509e
We've recently installed a 6509e to replace a 4507R as a core switch. I'm having a bit of trouble getting the QoS settings right. I've got most of it right, I think, but the old config has: map dscp...
3
|
11 years ago
|
3 | |
|
Routers architecture
Hi, Dear Friends. I am a beginner in networks routing, please send me a tutorial for architecture of router, because i don't know this architecture exactly for my project. Thanks.
1
|
11 years ago
|
1 | |
|
THE Weirdest Cisco problem ever
We were asked to capture some traffic destined for internal ftp servers. Enabled SPAN on a 6K switch (monitoring 2 ports) and attached a capture dev= ice to the switch. Right after we enabled SPAN, we...
2
|
11 years ago
|
2 | |
|
new IOS needed for a Cisco 2651
If anyone has an account and can help me with this... I'd really appreciate it. I have an account, but haven't tried giving them my serial numbers. I've heard they will allow access to IOS then, but...
—
|
11 years ago
|
— | |
|
Does Cisco 1721 support more than OSPF?
I'm thinking about getting Cisco 1721 for CCNA and possible CCNP study. Ci= sco on-line document seem to say Cisco 1721 support OSPF only. Is it true?= If it does only OSPF, then it wouldn't be a good...
2
|
11 years ago
|
2 | |
|
Cisco 2960 routing between vlans
Switch is a Cisco 2960-24TC IOS First let me say this switch is suppose to do layer 3 routing, which I've enabled with: Switch(config)#sdm prefer lanbase-routing I have two vlans setup vlan1 and vlan2...
10
|
11 years ago
|
10 | |
|
Video on how to study for CCNA
Check this video out, I would recommend it for someone who has no idea how to begin studying for the CCNA exam. http://certificationchat.com/content.php?46-How-to-Study-for-Cisco-s-CCNA-Exam
—
|
11 years ago
|
— | |
|
FTP/TLS Access Via PIX 7.2
I've been surfing around to try and work out how to configure a PIX to support FTP/TLS access from an Internet user to a server behind my PIX. I can't see any examples of how to configure this but a...
1
|
11 years ago
|
1 | |
|
How to configure an ntp client
Here is a really good video on how to configure an ntp client on a Cisco router. http://certificationchat.com/content/45-how-configure-ntp-client.html
2
|
11 years ago
|
2 | |
|
Cisco Easy VPN connects, but can't access remote LAN
I have Cisco Easy VPN setup on a SR520 router with IOS Version 12.4(20)T6. = The client computer is running Linux using vpnc 0.5.3 I'm able to establish the vpn connection, but can'= t ping the SR520...
13
|
11 years ago
|
13 | |
|
redistribute and distribute-list
Hi folks, I'd like to know if the distribute-list is used also in preventing routing loops when redistributing from one routing domain to another another and when of course there more than one points...
11
|
11 years ago
|
11 | |
|
Memory Upgrade for Cisco ASA5505
As many know, upgrading an ASA5505 to run firmware 8.4 causes older generat= ion 5505s to exhaust most or all of the default 256MB of configured memory. For those who, like me, don't want to spend...
—
|
11 years ago
|
— | |
|
Version 15.1(4)M4 outgoing byte count wrong
In IOS Version 15.1(4)M4 running on an 1811 the output byte count appears to be wrong on Virtual-Access interfaces for L2TP/IPsec. Virtual-Access2 is up, line protocol is up Hardware is Virtual Access...
4
|
11 years ago
|
4 | |
|
UCS Network Consulting Engineer
Hi Partners, Hope you are doing well! Please let me know if you have any suitable consultant available for the be= low requirement. UCS Network Consulting Engineer Locations: St Louis, MO Duration :...
—
|
11 years ago
|
— | |
|
Cisco 870 Dialer issue
Hi, I have a HQ site able to bring up a Dialer connection to a remote site (Site-BB). It also works in reverse i.e. Site-BB can make the connection into HQ. Now I have a requirement to get a 3rd site...
—
|
11 years ago
|
— |