AT&T Partner II w/ new Avaya Partner Mail VS R5

My VS R3 module died. Power light doesn't come on, nothing. Dial Int-777 get slow busy.

I've got a new R5 on the way so I decided to start reading on installation. It seems the VMS Hunt Group 7 has to be set. It says I should have a Form B1 and Form B2, which I have neither of. So I dont know how the original install was set up.

Is there a way to determine which extensions to assign my new 4 Port R5 to?

I've my setup goes like this:

I've got two 5 "port" racks for the system.

Rack 1:

Slot 1 - 206E (10/11/12/13/14/15) Slot 2 - 206E (16/17/18/29/20/21) Slot 3 - System Processor / Partner II R4.1 Slot 4 - 206E (22/23/24/25/26/27) Slot 5 - 206E (28/29/30/31/32/33)

Rack 2:

Slot 1 - 206E (34/35/36/37/38/39) Slot 2 - 206E (40/41/42/43/44/45) Slot 3 - Expansion Processor Slot 4 - Partner Mail VS R5 (soon) Slot 5 - 206E (no numbers)

So would that make my PMVS5 use 46/47/48/49 and have 50 as the next open extension?

Thank you for your time, Ryan

Reply to
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.