Re: Trying to work with a CM11A under Linux
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
10 discussions on Cabling-Design.com Forums about the Xantech MRC88: what owners asked, what went wrong, and what fixed it.
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
Looking to see if there are any dedicated Z-Wave forums. and the Z-wave alliance sites are all I have found.Also does anyone one know if Intermatic has released their Zwave outlet yet?Thanks
Hello everyone!We are having a 5 bedroom home built (basement + 2 floors, rectangular28' X 48') and I have certain audio/computer plans and had somequestions. You guys seem to be very knowledgeable about so manythings. My wife has some...
Hello everyone!We are having a 5 bedroom home built (basement + 2 floors, rectangular28' X 48') and I have certain audio/computer plans and had somequestions. You guys seem to be very knowledgeable about so manythings. My wife has some...
Are there wiring panels for bringing all the wires involved in a wholehouse sound system, as well as the surround speakers in the mainlistening area into a nice connection panel in the main living areawhere the equipment will be? At first...
All,I am in the process of installing an Elk M1 Gold system in my house. Itlooks awesome, but as it's my first installation. The basic system I aminstalling consists of the following: * M1 Gold with 16 onboard zones * 16-zone...