8 discussions on Cabling-Design.com Forums about the Senao 2611CB3: what owners asked, what went wrong, and what fixed it.
So, the world is migrating to free internet access. Even the NYTimes, today, has an article on the subject, saying, in effect, "It's not coming, it's here!" (The first paragraph, in part: "No fewer than 300 cities and towns around the...
Today was day one of the trials. Motor only, just to get familiar withthenew prop setup, and see what we could break.Nothing really broke, other than the forward bilge pump switch stuck"on"and the aft bilge pump switch wouldn't turn on, and...
So, I'm a starving college student, living in an AP rich environment.However, my laptop antenna, including amps like the Hawking 54G desktop, can't get out of my concrete cellar apartment.Several folks have offered to share their connection...
I asked a question along these lines a few months back andwas instructed how to (with DD-WRT firmware installed)do a wireless survey and then "join" another WAP's network.I was also warned (by whom I forgot) that doing this would"screw up"...
I already have a wireless bridge with a Senao chipset (but no brand onthe box itself ... chipset presumed from MAC address). It is b-only andworks fine with the Netgear access-point routers I once tried out, andworks fine with my printer...
What experience have users had with Senao or Engenius equipment, particularly with the AP/bridge, e.g., reliablility, user interface, remote administration?Scott