Re: Trying to work with a CM11A under Linux
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
6 discussions on Cabling-Design.com Forums about the Panasonic KX-TD1232: what owners asked, what went wrong, and what fixed it.
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
Hi:I need to change the extension that rings when the system automaticallyswitches to night mode.I changed "410 Intercep NT" and set all TRK GRPs to the new extension,207. However, the old extension, 106, keeps ringing. Am I changingthe...
I have been looking and HomeSeer voice for years....But we have a Panasonic KXTD-1232 in the house... so there is no place toput the Modem...We would need to pick up a phone, Dial '9' and THEN #, and it still mightnot get the right line...
I have a Panasonic KX-TD1232 connected to a KX-TVS100 voice mailsystem. I am trying to get the auto attendant to forward to an outsideline so when an outside call comes in to my extension, it rings to mycell phone.I've programmed my...
I work for a Christian Camp in OK and we have two Panasonic KX TD1232cabinets. One is currently being used with a TVS200 VM system and allextensions full. I have received a connection kit (two cards and acable) but they I can't get them...
We've had this KX-TD1232 for many years and, until now, it's been very reliable. Then one day, people started complaining that they "can't ring anyone in the office." It turned out that all the flex keys on the sets had reverted to their...