8 discussions on Cabling-Design.com Forums about the Nortel PIX525: what owners asked, what went wrong, and what fixed it.
Hi guys,I'm trying to setup ipsec tunnels to two Nortel boxes (Contivity 600)sharing the same subnet from a CISCO PIX-525E running under 6.3(3).PIX 525 LAN : 192.168.104.0/24Nortel boxes LAN: 192.168.105.0/24Indeed I want to ensure that if...
Hi,We have two remote sites, that due to their location and costconstraints, we cannot include in our MPLS model. Both of these sitesare in the same country, and each site has a Cisco PIX515E. Our headoffice has a PIX525.At each site I've...
HiWe have a network in which different departments/teams are in differentsubnets that are connected using multiple Linux IPTables firewallboxes. The servers are in a seperate subnet. Traffic between thesubnets is tightly controlled.There is...
Hi,I'm running PIX 7.1(2) with Cisco VPN clients. With split-tunneling, VPN users go out to the internet using their individual ISP connections. Problem right now is that, we have a vendor that has a couple of sites restricted to our...
I need some help troubleshooting an issue I'm having with an L2L VPN I have set up with one of our clients. The issue is that every once in a while, the tunnel goes down and the only way we seem to be able to get it going again is to...
Hi,I'm running PIX 7.1(2) with Cisco VPN clients. With split-tunneling, VPN users go out to the internet using their individual ISP connections. Problem right now is that, we have a vendor that has a couple of sites restricted to our...