5 discussions on Cabling-Design.com Forums about the Napco P1664: what owners asked, what went wrong, and what fixed it.
Hello All,Additional input. I was at the customers home yesterday and found the following.The wiring for line seizure was completed properly.The voltage for ON Hook was at 46.28 vdcThe voltage for OFF Hook was at 11.89 vdcThe RING voltage...
=3D=3D=3D=3D=3D=3D>Last time I bought a laptop I made sure it had a serial jack.I'm guessing that next time I'm in the market for a laptop that aserial jack wont be an option.
Building new house and interested in recommendations on the best alarmsystem to install. I will most likely be doing the work myself. I haveinstalled three full systems (2 DSC and 1 Moose) thus far and havenever had a problem with them. ...
I am wanting to replace my Napco MA1016e panel. I have a house wiredfor 13 zones with sensors in place. I'd like to make use of myexisting sensors and my 1016e keypads. Any recommendations? thanks
Anyone have a chance to play with a P1664... I hear it has 4 areas instead of 2, it should be released in the States soon......