7 discussions on Cabling-Design.com Forums about the Cisco C1200: what owners asked, what went wrong, and what fixed it.
Hi there,First of all I'm from Switzerland. Therefore I'm pre-sorry for my badenglish.My Problem is the following:I'm trying to set up an Cisco 1231 AP (IOS 12.3). I configured (withthe GUI) an SSID 'intern' associated with the VLAN 250.Now...
Hello,We have a Cisco AP1200 network with 12 AP's and 15 klients roamingbetween them.The problem is that all 15 clients (cisco 350 cards) looses ip after 30- 40 mins.Clients need to be restarted in order to get the system back up.I have no...
Hello,We have a Cisco AP1200 network with 12 AP's and 15 klients roamingbetween them.The problem is that all 15 clients (cisco 350 cards) looses ip after 30- 40 mins.Clients need to be restarted in order to get the system back up.I have no...
Hi guys,I have an Aironet 1200 that keeps reloading, I have tried the escapebutton to go to the rommon, and tried as well to recover the imagethrough the Mode button, both are not working. I can not access boththe CLI and the web page due...
I have Cisco Aironet 1231AG access point running Cisco IOS 12.2(13)JA1Early Deployment Software (fc1).It currently does not support WPA2,however it does suport WPA. I am planning to update the Cisco IOS to12.3.x that will allow the access...
I have Cisco access points with just G radios running the followingversionCisco IOS Software, C1200 Software (C1200-K9W7-M), Version12.3(8)JEB1,I have laptops running XP sp2 with all the patches that I could findI?m using the Intel 3945abg...