XTB multiple inputs


Is it possible (or recommended) to insert a 3-way adapter into the XTB so I can plug in a maxi-controller AND a TW523?


Reply to
John, SW Missouri
Loading thread data ...

Yes, that should work fine. I measured about 4Vpp on the "shared bus" during transmit, and still over 200mV during receive. And the combined current is well below the maximum limit on the X10 receptacle.


Reply to
Jeff Volp

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.