1. Home
  2. Cisco Systems
  3. rephrased: 2621 nat pool

rephrased: 2621 nat pool

Hi --

On the eth side, we nat to a 10.0.0.0 range. The pool consists of about

100 external IPs 208.x.x.x.

How can we 1. log which external ip the router assigns to a 10.0.0.0 ip and

  1. how can we lookup which internal 10.0.0.0 ips are using which external ips?

Thanks in advance, Dave

Reply to
Henry Cabot Henhouse III
Loading thread data ...

I'm not sure if there's any other way but...

1) if you are doing a debug ip nat and you have the log turned on the translation will appear there. However that will be impractical since the debug will use a lot of resources and may cause eventually an undesirable effect in the router.

2) Show ip nat translation and use the grip | include to fetch individually the translations of the ip addresses you want.

Reply to
Anthrax

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.