pix pptp server

Jan 19, 2007 1 Replies

Trying to set up a pix as a vpn server with little luck.



pptp client: 10.223.1.66 10.223.1.36 pptp server: 10.223.1.35



Pings from .6 to .36 are unsuccessful. Arp fuctions properly. Have tried acl permitting ip any any on the interface. Basis of configuration follows.



int e1 auto ip address inside 10.223.1.35 255.255.255.0 route inside 0 0 10.223.1.2 ip local pool pptp 10.223.1.36-10.223.1.37 sysopt conn permit-pptp vpdn group pptp acept dialin pptp vpdn group pptp vpdn group pptp vpdn group pptp vpdn group pptp



Trying to set up a pix as a vpn server with little luck.

pptp client: 10.223.1.66 10.223.1.36 pptp server: 10.223.1.35

Pings from .6 to .36 are unsuccessful. Arp fuctions properly. Have tried acl permitting ip any any on the interface. Basis of configuration follows.

int e1 auto ip address inside 10.223.1.35 255.255.255.0 route inside 0 0 10.223.1.2 ip local pool pptp 10.223.1.36-10.223.1.37 sysopt conn permit-pptp vpdn group pptp accept dialin pptp vpdn group pptp ppp auth mschap vpdn group pptp ppp encryp mppe 128 req vpdn group pptp client config address local pptp vpdn group pptp client auth local vpdn username username password password vpdn enable inside

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required