1. Home
  2. Cisco Systems
  3. Pix debug, get more out of it

Pix debug, get more out of it

Hi, I am quiet newbie on PIX. Debugging, I got it.

I've been told it is GRE traffic becasue of proto=0x2f

Well, could you point me to URL detailling the content of a debug like that? Like a guide how to get more out of a debug.

Thank you,

Alain

--------- PACKET ---------

-- IP --

10.10.186.10 ==> 10.10.166.10

ver = 0x4 hlen = 0x5 tos = 0xc0 tlen = 0x30

id = 0x773 flags = 0x0 frag off=0x0

ttl = 0xff proto=0x2f chksum = 0x756

-- DATA --

00000010: 00 00 08 00 45 c0 00 18 07 72 00 00 | ....E....r..

00000020: ff 2f 07 6f 0a 0a 42 01 0a 0a 56 01 00 00 00 00 | ./.o..B...V.....

00000030: aa | .

--------- END OF PACKET ---------

Reply to
Alain Georges
Loading thread data ...

You can find protocol numbers here:

formatting link
Maybe would be much better that you use sniffer like Ethereal for such purpose because it will decode most protocols (and fields in protocols) for you.

Reply to
Ivan Ostres

Hi, is it possible to export PIX debug to ethereal?

Thanks, Nicolas

Reply to
Micolas Namur

Not all, of course, but "results" from "capture" command, yes.

Reply to
Ivan Ostres

Hi, how to use the capture command? I mean, how to retrieve the cap file to my laptop?

Very interessing

Nicolas

Reply to
Micolas Namur

formatting link

Reply to
Ivan Ostres

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.