PIX 501 Routing ?

Hello, I have 2 routers in my network . i'm trying to add route lines to my main router (PX510) network address

10.10.10.100/ my netowkr computers are on 10.10.10.0 my other networks are on 10.10.60.0 and 10.10.50.0. router to these ends is on 10.10.10.90 when i tried to ping from the router to these addresses i got no response so i added static route on the routeing tab under the PX device manager to the 10.10.60.0 gateway 10.10.10.90 i used the tools

--> ping and tried pinging a computer on the other network with the ping tool again. i got a response. when I try to ping from the a computer on the 10.10.10.0 network i get no response unless i add a route line directly to 10.10.10.90 and then ping works as for the computer on the 10.10.10.0 defualt gateway is 10.10.10.100

Thnks in advance for any help

Reply to
Jogel
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.