NTP Failed Validity Tests 20

Mar 29, 2007 1 Replies

I am trying to sync my cisco devices to NTP server (Windows 2003) but even I send/receive the NTP packets to NTP server my devices can't sync to server...



I receive this debug message on my devices:


3w5d: NTP: xmit packet to 10.4.1.1:
3w5d: leap 3, mode 3, version 3, stratum 0, ppoll 64
3w5d: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)
3w5d: ref 00000000.00000000 (03:30:00.000 TST Mon Jan 1 1900)
3w5d: org C9B63EA5.F4000000 (17:03:25.953 TST Thu Mar 29 2007)
3w5d: rec AF5F6364.FDD417F2 (03:06:04.991 TST Sun Mar 28 1993)
3w5d: xmt AF5F6365.FDDC943A (03:06:05.991 TST Sun Mar 28 1993)
3w5d: NTP: rcv packet from 10.4.1.1 to 10.10.10.11 on Vlan7:


3w5d: leap 3, mode 4, version 3, stratum 0, ppoll 64



3w5d: rtdel 0000 (0.000), rtdsp 10400 (1015.625), refid 00000000 (0.0.0.0)
3w5d: ref C9B62DEE.6C10624D (15:52:06.422 TST Thu Mar 29 2007)
3w5d: org AF5F6365.FDDC943A (03:06:05.991 TST Sun Mar 28 1993)
3w5d: rec C9B63EA6.F4000000 (17:03:26.953 TST Thu Mar 29 2007)
3w5d: xmt C9B63EA6.F4000000 (17:03:26.953 TST Thu Mar 29 2007)
3w5d: inp AF5F6365.FE345DEB (03:06:05.992 TST Sun Mar 28 1993)


3w5d: NTP: packet from 10.4.1.1 failed validity tests 20


3w5d: Peer/Server Clock unsynchronized

Thanks



leap == 3 => unsync clock stratum == 0 bad

Same conclusion

Get ntp syncronized. (Windows is not the first platform of choice in comp.protocols.time.ntp) /hjj

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required