I have set up many PIX-to-PIX but this is the first time I have tried to set up a PIX and VPN Client.
I have followed "Cisco - How to Configure the Cisco VPN Client to PIX with AES" and I just can't get to first base. I know I have general connectivity because I can SSH into the PIX on the external interface. Other than that the VPN client says it is 'initializing' and then 'contacting the security gateway', then errors out with reason 412
Using 'show isakmp sa' and 'ipsec sa' at the PIX gives no indication of any pending connection.
I would sure appreciate any suggestions or ideas.
Brian