Internal Web Server with cisco 1841 problem

If you're having hosts in the same subnet as the web server (192.168.1.x) access the web server on its external address (172.16.32.10) you need to be natting the source address of the clients so the web server replies to that address and doesn't reply directly back to the clients. Clients expect traffic to come from "172.16.32.10".

BernieM

Here is what I have in my NAT:

Vlan1 inside = 192.168.1.1

FE0 outside = 172.16.32.10

ip nat inside source list 1 interface FastEthernet0 Overload ip nat inside source static tcp 192.168.1.100 80 interface fastethernet0 80

What else would I need ?

Thanks aga> > Hello,

I don't think you can do it because you can't configure an interface as both 'nat inside' and 'nat outside' it has to be one or the other. Clients in the same subnet at the server need to use the servers real adddress.

BernieM

But keep thinking, as you could do it using another device doing the natting. Like a Radware ASD ...