hi all,
I have a question regarding the class-default inside CBWFQ/LLQ. In my config I created 2 classes:
policy-map llq class class1 bandwidth 12 class class2 bandwidth 36
the policy-map was applied on Serial interface with badwidth parameter set to 64kb/s.
Then I send a lot of traffic from class1, class2 and not classified, but only packets from class1 and class2 riched the destination. In the "show policy-map interface" all not classified traffic was recognized as class-default but all packets were dropped. The question is - why the class-default becomes starving when the link is overloaded? Shouldn't the class-default get remaining (not reserved bandwidth - 16kb/s)?
Can anyone give me an explanation for the above?
Thanks, Alex