Hi,
I am seeing a HIBATVG (high battery voltage alarm) on one of my CIsco ONSes #15454. Any suggestions as to what could be wrong? I have already made sure that the alarm thresholds are set right. I have toggled the active and standby TCC cards- the alarm was present in both the cases.
Is there any other way of confirming if the alarm is due to a hardware issue? There was a field notice by Cisco for TCC2 cards that had HIBATVG alarm issue, but based on the serial numbers on my card, this issue/ bug does not apply!!
Thanks for the help.
-Priya