1. Home
  2. Cisco Systems
  3. catalys 3550 series - routing

catalys 3550 series - routing

hi,

i have two VLAN 89&100 connected on two catalyst,

those two vlan work on vlan trunking and routage work fine between my clients with HSRP gateway

but default gateway is on static access 1 and i dont know how :

- connect this internet connection with 255.255.255.252 mask on two catalyst !! (-> then i have natted my internet connection on 192.168.0.254)

- do routage with static acces

i dont have acl

C 192.168.5.0/24 is directly connected, Vlan1 89.0.0.0/27 is subnetted, 1 subnets C 89.202.193.32 is directly connected, Vlan89 C 192.168.100.0/24 is directly connected, Vlan100 S* 0.0.0.0/0 [1/0] via 192.168.5.254

thank for all

pierre

Reply to
pierre
Loading thread data ...

routage with static access vlan fork fine, i have a mistake with route back configuration

but i still have pb with my internet connection thant do not permit have 4 address :

2 for standby conf (one for each catalayst) 1 for hsrp and one for gw

thanks

"pierre" a écrit dans le message de news:

4623748c$0$15690$ snipped-for-privacy@news.free.fr...
Reply to
pierre

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.