ASA 5510 multiple outside networks multiple IP

Gerry,

I will tell you that we are fighting the same problem here on our end. We have worked with TAC over these last couple of weeks and also consulted some folks inside Cisco. The specialists at Cisco say that there is a way to support what you are describing, we just cannot find anyone to tell us the correct information. As it stands we are still working with them. I will post our results once I hear more. We are working with an ASA 5510 with no sec plus license 7.2.2(3)

Kenny

| our ISP provides us with two C-Class Networks lets say 1.1.1.0 and | 1.1.2.0. | with the gateways 1.1.1.1 and 1.1.2.1. | | Now we have on different networks different services running | | e.g. 1.1.1.2 (vpn) | 1.1.2.2 (www) | 1.1.2.3 (special application) | | which we want to consolidate to come into our private network over one | ASA5510 | | when we try to configure | one outside interface to 1.1.2.2/255.255.255.0 | and then the next outside interface to 1.1.2.3/255.255.255.0 | | the ASA tells us that this is not possible due to overlapping networks | | is there any solution for that. | The second question which appears is how to configure two default | routes | as the 1.1.1.2 requests need to go back to 1.1.1.1 | and the 1.1.2.3 and the 1.1.2.2 requests need to go back to 1.1.2.1

Hi Gary. Why do you need one outside interface with 1.1.2.2/24 and then another interface with 1.1.2.3/24? If I understand you correctly you want two phisical interfaces configured with the addresses above and not only one phisical interface?