Latest threads in Virtual Private Networksshow only best voted threads

Subject Author Posted Replies
 
A question about Checkpoint firewall and Telnet over VPN
Hello I have been trying different options to resolve an issue with a remote site VPN tunnel. I have the tunnel up and working. I have tried using IPSEC with low,medium and strict security profile....
5
5
 
OpenSWAN vs. iptables
I have two Ubuntu-server boxes, as gateways on two different networks: each one has two NIC, eth0 to the LAN, eth1 to the Internet. I set up OpenSWAN on both machines and iptables like this: iptables...
4
4
 
Help with Symantec VPN 100 Log Entry
Hi, Can someone please explain the following log entries mean? 11/03/2006 09:29:23.05 EK - Initiating IKE Aggressive Mode 11/03/2006 09:29:23.35 EK - STATE_AGGR_I1: initiate 11/03/2006 09:29:24.65 EK...
2
2
 
Fail to integrate Zywall 70 to Cisco 3560
Hi, I got problem to integrate ZYXEL VPN (Zywall 70) to our network that using Layer 3 switch (cisco 3560). Seems the Zywall only able to do tunneling between LAN to LAN but unable do LAN to LAN to...
 
vpn endpoint inside firewall
Hi all, When placing a VPN router/server inside a firewalled network, I assume it will be fine to just attach one LAN-side port to the local LAN, and not have a connection to the vpn router's WAN...
 
SonicWall VPN says Fragmented Packet Dropped
SonicWALL Firmware 5.1.7.0 When I attempt to connect to the VPN, I'm getting the error message "Fragmented Packet Dropped" in the device logs. I tested this from my client behind a Cisco ASA at the...
4
4
 
VPN connection error 651
Hi all I have a client with about 25 laptop users running XP and Outlook that connects to the Exchange server via VPN. All laptops connecting on VPN w/o any problem, except one.He is getting an error...
1
1
 
openvpn Routing Problem
Hi, I have small question and can't figure it out howto route a single IP Address through a vpn. Maybe someone could give me some help. VPN-Net is : 192.168.99.0 I can ping to several clients and from...
 
Please help in sending Broadcast msg
Hello i have to broadcast over vpn. I have local network and vpn, LAN ips are 192.168.1.x and vpn ips are 10.0.0.x. i am creating vpn thru windows server 2003 RAS. i have to broadcast msgs over vpn...
 
Netopia R910 and WINS
We have two Netopia R910 routers, one at our main office and one at a remote location on another ISP. We have a VPN between the two routers which works great for file sharing and email (Exchange.)...
4
4
 
Experience with Netgear FVS to CISCO ISR VPNs?
We are trying to get 20 or so remote offices to connect to a new CISCO 2811 at a central colocation site. All of these sites have Netgear FVS318 routers that currently have a couple VPNs up and...
 
Looking for hardware VPN solution
Hello, I am looking for a hardware vpn solution. I have a simple requirement: i need clients using Windows XP VPN client to connect to my router's IP and be joined to my LAN. All i am looking for is a...
1
1
 
Cisco VPN client connects, but restricts LAN access even when option is ENABLED...
Our help desk (about 20 of us) connect to the corporate network from our location via the CISCO SYSTEMS VPN CLIENT software version number 4.0.3(f). We DO have ENABLE LAN ACCESS checked, because...
 
vpn between linksys and pix
Hi I need to make a static vpn tunnel between two places but in one localization is only with dynamic ip on one side of tunnel is pix on other linksys BEFSX41 with dynDNS and support. when the ip is...
 
VPN Problem
Hi, Go into advanced tcpip properties of the vpn connection and untick the 'use default gateway on remote network' then only information destined for the network you are vpn'd into will get sent over...
1
1