startup-config

Hi Whenever my router is reloaded it always asks me if I want to enter an initial configuration dialog. I type no and then I have to copy startup-config to running-config to get it running.

How do I avoid the initial startup question so that it reads my startup-config by default ?

thanx

G
Reply to
Grant
Loading thread data ...

It seems your config does not get saved... Try using copy running-config startup-config

Reply to
Shishko

Well, I'm guessing - wrong config register? Sth like 0x2142... take a look at your config register value and change it to default which is

0x2102.
Reply to
Slawomir Kawala

Hi,

Your router instructed by config-register to ignore startup config. Change the register setting:

config t config 0x2102 exit wr mem reload

Good luck,

Mike CCNP, CCDP, CCSP, CCVP, MCSE W2K, MCSE+I, Security+, etc. CCIE R&S (in progress), CCIE Voice (in progress)

------ Headset Adapters for Cisco IP Phones

formatting link
formatting link

Reply to
headsetadapter.com

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.