Modem DialIn AUX port problem

Have a question or want to start a discussion? Post it! No Registration Necessary.  Now with pictures!

Threaded View
Hi,
I'm trying to connect router 2801 over POTS. I have connected USR modem to
AUX port on one line and trying to login from my laptop on the other phone
line. When I call the number from hyper terminal modem connected to aux port
answers and start making sounds, but the line connected to laptop is still
producing ringing sound!!
Any sugestions? Thanks.



Re: Modem DialIn AUX port problem

Quoted text here. Click to load it

did you hard set the modem to 9600b? Did you configure the aux port?
 http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml-Brian


Re: Modem DialIn AUX port problem
line aux 0
 password 7 130B18115A5E5724223138
 login
 modem InOut
 modem autoconfigure discovery
 transport input all
 speed 115200
 flowcontrol hardware

Quoted text here. Click to load it
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml-Brian
Quoted text here. Click to load it



Re: Modem DialIn AUX port problem
And, that is the document that I read and all seems fine. Maybe the problem
is integrated modem on the other side?

Quoted text here. Click to load it
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml-Brian
Quoted text here. Click to load it



Re: Modem DialIn AUX port problem
OK. I've successfully connected to router. The problem was here:

I put modem autoconfigure type usr_sportster instead of modem autoconfigure
discovery .

Even that with discovery router also found my modem. OK, now I don't get any
prompt on my HyperTerminal window. (??)


Quoted text here. Click to load it



Re: Modem DialIn AUX port problem

Quoted text here. Click to load it

speed mismatch on your HT settings



Re: Modem DialIn AUX port problem
OK. I managed the connection and everything worked fine (only the speed was
28k). But now I'm expiriencing another problem. Why my modem change its
settings? Yesterday worked fine, I even saved settings with at&w0 and at&w1.
Today when I tried to connect from my home same problem as yesterday. I
heard ringing sound and connection was established. When I check modem's
settings from router I noticed that it is set to PULSE instead of TONE. How
come that settings is changed by itself?


Quoted text here. Click to load it



Re: Modem DialIn AUX port problem


Me+8jCDlr7lBVVjlj6NMSU5F6YOo5YiG55qE6YWN572u77yaCuOAgOOAgOOAgOOAgOOAgOOAgOOA
gOOAgGxpbmUgYXV4IDAK44CA44CA44CA44CA44CA44CA44CA44CA44CA44CAcGFzc3dvcmQgMCA0
bWFvCijphY3nva7nmbvpmYblr4bnoIHvvJvkuI3orr7lr4bnoIHml7blv4XpobvovpPlhaVubwps
b2dpbu+8jOWQpuWImeaXoOaViCkK44CA44CA44CA44CA44CA44CA44CA44CA44CA44CAbW9kZW0g
aW5vdXQK44CA44CA44CA44CA44CA44CAMu+8jCDlr7lBVVjlj6PlvILmraXlj6Ppg6jliIbnmoTp
hY3nva7vvJoK44CA44CA44CA44CA44CA44CA44CA44CAaW50ZXJmYWNlIGFzeW5jMC8wCuOAgOOA
gOOAgOOAgOOAgOOAgOOAgOOAgOOAgOOAgGFzeW5jIG1vZGUgaW50ZXJhY3RpdmUK77yI5b+F6aG7
6K6+572u5Li65Lqk5LqS5qih5byP77yJCg==


Site Timeline