Paper Deadline Reminder: IEEE Conference on Services Computing

I wanted to use this note to remind you that the paper submission deadline of IEEE International Conference onn Services Computing (SCC

2005) is approaching. Thank you very much for your great support.

2005 IEEE International Conference on Services Computing (SCC 2005) ===================================================================

July 12-15, 2005, Orlando, Florida, USA Sponsored by IEEE Computer Society

formatting link
Bridge the Gap between Business Services and IT Services

Services now account for more than half of the U.S. economy. Services Computing, as a new cross discipline, addresses how to enable IT technology to help people perform business services more efficiently and effectively. As we can see, Services Computing currently shapes the processes of business modeling, business consulting, solution creation, service delivery, and software architecture design, development and deployment, monitoring and management.

The 2005 IEEE International Conference on Services Computing (SCC

2005) aims to the topics of bridging the gap between Business Services and IT Services with a new ground breaking technology suite that includes Web services and service-oriented architecture (SOA), business strategy and design, business process integration and performance management, and utility/grid computing. It is sponsored by the IEEE Computer Society Technical Committee on Services Computing and will be co-located with the 2005 IEEE International Conference on Web Services (ICWS 2005).

The theme of this joint IEEE conference on SERVICES is 'Bridge the Gap between Business Services and IT Services'. Since Web Services is an IT technology, ICWS 2005 will put its focus on all aspects of IT infrastructure services. SCC 2005 concentrates on business services, business solutions, and the bridging technologies such as Business Strategy and Design, Business Process Integration and Management, SOA, and Grid and Utility Computing.

SCC 2004 was held in Shanghai, China, September 15-18, 2004. A total of 330 papers were submitted to SCC 2004. Submissions were from over

30 countries and regions. 37 were accepted as full research papers, 9 were accepted as short papers, and 50 were accepted as special session papers.

SCC 2005 has the following major research tracks: Foundations of Services Computing, Service-Oriented Architecture (SOA), Grid/Utility Computing, and Business Process Management and Business Integration.

SCOPE: Topics of interest include, but are not limited to, the following:

Foundations of Services Computing

- Business Strategy and Design

- Services science

- Services Modeling

- Service-oriented business consulting methodology and utilities

- Services delivery

- Servicesvalue chain and innovation lifecycle

Service-Oriented Architecture (SOA)

- Service-Oriented Architecture (SOA)

- SOA Solution Stack

- SOA Industry Standards

- SOA Industry Solutions

Business Process Management and Business Integration

- Enterprise Modeling

- Business process modeling, transformation and integration

- Business performance management

- Software architecture design, development and deployment (software as a service)

- Application integration services (e.g. Enterprise Service Bus)

- Service Level Automation and Orchestration

- Industry solution patterns

- e-Business Solutions

Grid/Utility Computing

- Grid Computing

- Utility Computing

- Utility Business Services

SCC 2005 Special Tracks:

Special Track 1: IEEE SCC 2005 Special Track on Service Provisioning Strategies Special Track 2: IEEE SCC 2005 Special Track on Business in the Grid


Authors are invited to submit original, unpublished research papers that are not being considered in another forum. Manuscripts will be limited to 8-10 (IEEE Proceeding style) pages and be printed on 10 or

12 size font. Please follow the IEEE Computer Society Press Proceedings Author Guidelines to prepare your papers. Electronic submission of manuscripts (in PDF or Word format) is required. Detailed Instructions for electronic paper submission, panel proposals, tutorial proposals, and review process can be found at
formatting link

The length of the camera-ready of an accepted paper will be limited to

8 (IEEE style) pages. At least one author of each accepted paper is required to attend the conference and present the paper. The IEEE SCC 2005 Proceedings will be collected in EI Compendex. The detailed submission instructions can be found at SCC 2005 web site. The enhanced version of the selected best papers published in the SCC 2005 will be invited ! to publication in the International Journal of Web Services Research (JWSR) (by Idea Group) and possibly other related journals. Some speakers of the keynotes, panels, and tutorials will be invited to submit articles to extend their presentations for IEEE IT Professional Magazine.


All submissions will be evaluated for originality, significance, clarity, and soundness.

Each paper will be refereed by at least two to three researchers in the topical area.


One Best Paper award and 1-3 Best Student Paper Awards will be presented by SCC 2005. The first author of the best student papers should be full-time students.


Abstract Submission Deadline: Feb. 14, 2005 (Monday) - NEW! Paper Submission due date: Feb. 14, 2005 (Monday) - NEW! Decision Notification (electronic): April 11, 2005 (Monday) - NEW! Camera-Ready copy due date & Pre-registration due: April 29, 2005 (Friday)

- NEW! General Chairs:

Carl K. Chang (Iowa State University, USA) Liang-Jie (LJ) Zhang (IBM T. J. Watson Research Center, USA)

Program Committee Chairs:

Frank Leymann (University of Stuttgart, Germany) Sandeep Purao (Pennsylvania State University, USA) Hai Jin (Huazhong University of Science and Technology, China)

Industrial Track Chairs:

Ali Arsanjani (IBM Global Services, USA) Wu Chou (Avaya Labs Research, USA) Joseph Williams (Microsoft, USA)

Panel Chairs:

Frank Ferrante (Editor in Chief, IEEE IT Professional Magazine, USA) Dejan S. Milojicic (Hewlett-Packard Laboratories, USA) J. Leon Zhao (University of Arizona, USA)

Publicity Chairs:

Patrick C. K. Hung (University of Ontario Institute of Technology, Canada) Anup Kumar (University of Louisville, USA) Elena Ferrari (University of Insubria at Como, Italy)

Tutorial Chair:

Ling Liu (Georgia Institute of Technology, USA)

Job Fair Chair:

Hemant Jain (University of Wisconsin - Milwaukee, USA)

Finance Chair:

Johnny Wong (Iowa State University, USA)

Publication Chair:

Gurpur Prabhu (Iowa State University, USA)

Awards Chair:

Rong N Chang (IBM T.J. Watson Research Center, USA)

Poster Chairs:

Graciela Gonzalez (Sam Houston State University, USA) Jia Zhang (Northern Illinois University, USA)

Web Chair:

Jinchun Xia (Iowa State University, USA)

Registration Chair:

Dingding Lu (Iowa State University, USA)

Technical Program Committee

Bajaj, Akhilesh (The University of Tulsa) Bertino, Elisa (CERIAS Purdue University) Bhagavatula, Krishna (Tata Consultancy Services) Bu-Hulaiga, Ihsan Ali (Joatha Informatics Consulting Center (JICC)) Buyya, Rajkumar (The University of Melbourne) Cai, Guoray (Pennsylvania State University) Cai, Wentong (Nanyang Technological University) Cao, Jiannong (Hong Kong Polytechnic University) Chang, Rong N. (IBM T.J. Watson Research Center) Chen, Jian (Tsinghua University) CHEN, Ying (IBM China Research Lab) Cheung, David (The University of Hong Kong) Chiu, Dickson K.W. (Dickson Computer Systems) Chua, Cecil Eng Huang (Nanyang Technological University) Cooper, Brian F. (Georgia Institute of Technology) Dustdar, Schahram (Vienna University of Technology, Austria) Etzion, Opher (Active Technologies) Guo, Minyi (University of Aizu) Huhns, Michael N. (University of South Carolina) Iwano, Kazuo (IBM Corporation) Jacob, Varghese S. (University of Texas at Dallas) Katz, Daniel S. (JPL/Caltech, USA) King, Roger (Buzz) (University of Colorado at Boulder) King, Chung-Ta (National Tsing Hua University, Taiwan) Kishimoto, Hiro (Fujitsu Laboratories) Kitagawa, Hiroyuki (University of Tsukuba) Kreulen, Jeffrey T. (IBM Almaden Research Center) Lau, Francis C.M. (University of Hong Kong) Lee, Dongwon (Penn State University) Li, Wen-Syan (IBM Almaden Research Center) Li, Minglu (Shanghai Jiao Tong University) Lim, Ee-Peng (Nanyang Technological University) Lin, Geng (Cisco Systems, Inc.) Ludwig, Heiko (IBM TJ Watson Research Center) Luo, Min (IBM Global Services) Madria, Sanjay K. (University of Missouri-Rolla, USA) Mark, Leo (College of Computing, Georgia Tech, USA) Maximilien, E. Michael (IBM Almaden Research Center) Mehta, Kumar (University of Connecticut) Mitra, Prasenjit (Pennsylvania State University) Morar, John F (IBM T.J. Watson Research Center) Ouksel, Aris M. (The University of Illinois at Chicago) Potok, Thomas E. (Oak Ridge National Laboratory) Ramesh, Balasubramaniam (Georgia State University) Reinwald, Berthold (IBM Almaden Research Center) Ritter, Norbert (University of Hamburg) Rossi, Matti (Helsinki School of Economics) Shan, Ming-Chien (HP Laboratories) Sheth, Amit (LSDIS Lab, UGA and Semagix, Inc) Therani, Madhusudan (University of Arizona) Tsai, Jeffrey J.P. (University of Illinois at Chicago) Voruganti, Kaladhar (IBM Almaden Research) Wang, Cho-Li (University of Hong Kong) Xu, Zhiwei (Institute of Computing Technology (ICT)) Zhang, Yanqing (Georgia State University) Zhang, Yanchun (Victoria University, Australia) Zhao, J. Leon (University of Arizona) Zhao, Huimin (School of Business Administration, University of Wisconsin-Milwaukee)

Technical Steering Committee

Carl K Chang (Iowa State University, USA) Ephraim Feig (Kintera Inc, USA) Hemant Jain (University of Wisconsin- Milwaukee , USA) Frank Leymann (University of Stuttgart, Germany) Minglu Li (Shanghai Jiaotong University, China) Jeffrey Tsai (University of Illinois at Chicago, USA) Calton Pu (Georgia Tech, USA) Zhiwei Xu (Institute of Computing Technology (ICT), China) Liang-Jie Zhang (IBM T.J. Watson Research Center, USA)

Reply to
LiangJie Zhang
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.