5 discussions on Cabling-Design.com Forums about the Netgear WPN311: what owners asked, what went wrong, and what fixed it.
I have a MIMO 802.11g router, and USB wireless adaptor.range is insufficient.I measured signal to noise ratio in netstumbler on the comp with theusb thing. It went from -85dbi to -95dbi and disconnected (dunno ifwas db or dbm or dbi ). But...
Anyone, please.I have a situation where there's a sales office and a construction back office. They both need to be on the same WiFi network. The two sites are located about 200 feet apart in wood frame structures with NO intervening...
This new "MIMO" wireless card is supposed to work with 98SE. The card appears to install, and "The device is working properly" is displayed in Device Manager, no exclamation points. However, the Netgear WPN311 Wireless Assistant...
I just (foolishly) got a Netgear WPN311 card to replace a WGT311T cardwhich went faulty with a hardware error. Well, I'd had my problems with the stupid WGT311T card and it's'Wireless Wizard' and sure enough I'm getting even more problems...
There are are number of cards out there with detachable antennas... Dothey all use the same standard connector?If not, what are the different standard ones they use?And in particular, I have am interested in a replacement antenna/aerial for...