5 discussions on Cabling-Design.com Forums about the Leviton TM751: what owners asked, what went wrong, and what fixed it.
I finished initial schematic capture for the XTB-II. It will not be areplacement for the present XTB, which will remain the convenient plug-inbooster for just about any X10 transmitter.The basic XTB-II will include two output coupling...
I have a PowerLinv V2 controller [USB] with 2 insteon signal lincconnected in each phase of 110V/50Hz in a 2-single phase connections.There are x10 lamp module [LM465] along with motion sensor MS14A setto the house code of lamp module. The...
I know this is an old subject... but I could use some help. :-]Just got ahold of a TM751, 2 lamp modules and an RF pad. Hooked up twolamps, everything worked great the first day.The next day I started to get the endless dim. Lamps turn on...
I have a decora style wall switch that controls two fluorescent lights. I do not recall the model number but I do remember that I bought it about 11 years ago from Smarthome. I use KR19A remote controller and TM751 transceiver to control...
I didn't think to try this when I was testing the Insteon starter kit.Page 35 of the Insteon whitepaper (released after I returned the starter kitto Martin Custer at implies that Insteon receivers can'hear' an Insteon signal even if there...