7 discussions on Cabling-Design.com Forums about the Leviton RR501: what owners asked, what went wrong, and what fixed it.
While working on the XTB-II AGC loop, I discovered it can be difficult todeal with nose generated by compact fluorescent bulbs. A photo of CF noisein the X10 passband can be found at: crossings are at dead center of the trace, and 8.3mS on...
I have an Insteon starter kit (tabletop controller, 2 RF links, 2 lampmodules) on loan from a Home Automation dealer. I set it up a few days agoand will test it over the next couple of weeks, posting a review here andadding to it as the...
Hi;I bought a new car with a Homelink system in it that controls theGarage door opener. That is great! I would also like to be able to turnon the ceiling lights in the living room. How is this done? I own thehouse, and am pretty good with...
I have a PowerLinv V2 controller [USB] with 2 insteon signal lincconnected in each phase of 110V/50Hz in a 2-single phase connections.There are x10 lamp module [LM465] along with motion sensor MS14A setto the house code of lamp module. The...
I've been out of the game for some time and upon my return see that the traffic here seems to have reduced *substantially*. Is there a new & improved place that most of the general HA discussion has moved to?Paul
While waiting for the Polycases to arrive, I have been working on the TW523emulation. I had originally planned to duplicate the TW523 functionality asclosely as possible, but I added a few additional capabilities. Anyfeedback or...